Free May-2023 UPDATED EMC DES-1241 Certification Exam Dumps is Online
EMC Exam 2023 DES-1241 Dumps Updated Questions
NEW QUESTION # 27
How many fan module failures can a node tolerate?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 28
What is the protocol used for the storage network?
- A. iSCSI
- B. SMB
- C. NFS
- D. FC
Answer: A
Explanation:
Explanation/Reference: https://www.dellemc.com/en-us/collaterals/unauth/white-papers/products/storage/h18149-dell- emc-powerstore-platform-introduction.pdf (23)
NEW QUESTION # 29
What is the reason for the best practice of leaving 2 Us of space at the bottom of the rack when racking Dell EMC PowerStore systems?
- A. Provide cooling air intake
- B. Leave clearance for wheel roll
- C. Leave room for serviceability
- D. Provide better rack stability
Answer: C
NEW QUESTION # 30
A Storage Administrator notices a Major alert present in Dell EMC PowerStore Manager relating to data protection. What action within the alert details slide-out panel is helpful in troubleshooting the data protection problem?
- A. Access the Repair Flow link to schedule a support engagement
- B. Acknowledge the alert to clear and resolve the problem
- C. Examine Notifications to obtain a list of corrective actions
- D. View the Associated Events for earlier related alerts
Answer: A
NEW QUESTION # 31
During Dell EMC PowerStore startup, both appliance nodes have rebooted in service mode. What must be done first to avoid management software conflicts?
- A. Clear the boot mode
- B. Reboot node B
- C. Return node A to normal mode
- D. Disable node B boot mode
Answer: C
Explanation:
Reference:
https://www.dell.com/support/manuals/pk/en/pkbsd1/powerstore-1000/pwrstr-isg/power-control- procedure-considerations?guid=guid-4352c94e-0ae7-4a2e-8593-9ae135bb9e34&lang=en-us
NEW QUESTION # 32
When connecting a PowerStore base enclosure to 2 expansion enclosures, match the base SAS ports in column A to their corresponding expansion LCC ports in column B.
Answer:
Explanation:
Reference:
https://www.dell.com/support/manuals/pk/en/pkbsd1/powerstore-1000/pwrstr-isg/cable-the-base-enclosure-to- the-expansion-enclosure?guid=guid-d68d049f-2b77-489f-b1ab-553f4f3de8aa&lang=en-us
NEW QUESTION # 33
Which option is used when running the journalctl command to query log messages regardless of capitalization?
- A. option --casesensitive=YES/NO
- B. option --casesensitive=TRUE/FALSE
- C. option -ignorecase
- D. option -quotes
Answer: C
NEW QUESTION # 34
Refer to the exhibit.
What is the result of the network configuration shown for a Dell EMC PowerStore T?
- A. Interfaces are configured for remote replication traffic
- B. Ports 1/1/55 and 1/1/56 are added to a new LACP domain
- C. Interfaces are configured for PowerStore discovery traffic
- D. Ports 1/1/55 and 1/1/56 are added to the VLTi domain
Answer: D
Explanation:
1. Run vlt-domain <ID> to create a new VLTi domain.
2. Run discovery-interface ethernet chassis/slot/portchassis/slot/port to add the two VLTi ports to the new domain. 3. Run backup destination <IP address of the other switch> to set the other switch as VLT backup, which is required for VLT heartbeat. #(conf-range-eth1/1/55-1/1/56) vlt-domain 1 #(conf-vlt-1) discovery-interface ethernet 1/1/55-1/1/56 #(conf-vlt-1) backup destination 172.17.57.30
NEW QUESTION # 35
What is the maximum number of expansion enclosures that a single Dell EMC PowerStore appliance supports?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
Reference:
https://www.dellemc.com/resources/en-us/asset/data-sheets/products/storage/h18143-dell-emc- powerstore-family-spec-sheet.pdf (1)
NEW QUESTION # 36
What is the last step when adding a drive to a Dell EMC PowerStore system?
- A. Backup the keystore
- B. Add the drive to the pool
- C. Verify the new drive is seen
- D. Zero the drive
Answer: C
Explanation:
Reference:
https://www.dell.com/support/manuals/pk/en/pkbsd1/powerstore-9000t/pwrstr-isg/install-a-25- drive?guid=guid-bddae51e-a561-4e84-bc0a-c2e99a43f033&lang=en-us
NEW QUESTION # 37
When planning for a Dell EMC PowerStore T implementation, how many IP addresses are required for the storage network?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
Reference:
https://topics-cdn.dell.com/pdf/pwrstr-ntwk-plang_en-us.pdf (22)
NEW QUESTION # 38
Which component can be replaced while the Dell EMC PowerStore is up and running?
- A. M.2 Device
- B. SFP
- C. LCC
- D. 4-Port Mezz card
Answer: B
NEW QUESTION # 39
Which LED combination shows a connected and working node?
- A. power LED: blinking green fault LED: off
- B. power LED: steady green fault LED: amber
- C. power LED: blinking green fault LED: blue
- D. power: LED: steady green fault LED: off
Answer: D
NEW QUESTION # 40
What does the output of the PSTCLI command "nas_server show" display from a Dell EMC PowerStore T?
- A. If NAS servers are present if they are either NFS or Licensed
- B. If NAS servers are present and if they are either Started or Degraded
- C. SIDs of SMB NAS servers joined to the AD Domain
- D. Memory utilization and thread count for NFS NAS servers
Answer: A
NEW QUESTION # 41
Refer to the exhibit.
What type of cable is used for the ToR switch configuration shown for the S5248F-ON switches?
- A. 10 GigE SFP optical cable
- B. 100 GigE QSFP28
- C. 10 GigE Cat 6 Ethernet RJ-45
- D. 25 GigE Twinax
Answer: B
NEW QUESTION # 42
What describes Dell EMC PowerStore X front-end cabling?
- A. Storage and management use the same LACP bonded cable connection
- B. Uses VLTi data switch interconnectivity to support vMotion networks
- C. Management and discovery use the same cables and connections as storage
- D. Uses internal VMware virtual switching and does not require a management network
Answer: B
NEW QUESTION # 43
What does the output of the PSTCLI command "nas_server show" display from a Dell EMC PowerStore T?
- A. If NAS servers are present if they are either NFS or Licensed
- B. SIDs of SMB NAS servers joined to the AD Domain
- C. If NAS servers are present and if they are either Started or Degraded
- D. Memory utilization and thread count for NFS NAS servers
Answer: C
NEW QUESTION # 44
......
The EMC DES-1241 (Specialist - Platform Engineer, PowerStore) Certification Exam is an essential certification for professionals who want to validate their skills and knowledge in implementing, managing, and troubleshooting PowerStore storage solutions. It is a globally recognized certification that demonstrates expertise and dedication to the field of storage systems. With a strong foundation in storage system administration, virtualization technologies, and network protocols, candidates can pass the DES-1241 exam and advance their careers in the IT industry.
EMC DES-1241 is an industry-recognized certification exam for platform engineers who specialize in PowerStore. This exam is designed to test the skills and knowledge required to install, configure, manage, and troubleshoot PowerStore storage systems. The certification exam is intended for IT professionals who are seeking to enhance their career in the storage field.
EMC Certified DES-1241 Dumps Questions Valid DES-1241 Materials: https://certtree.2pass4sure.com/DCS-PE/DES-1241-actual-exam-braindumps.html